Agar is a hydrocolloid derived from natural marine red seaweed and is often used as a gelling agent in the food industry and scientific laboratories.
Agar has a high gel strength and it forms a strong and stable gel structure when cooled.
Agar gel strength is mainly determined by the concentration of the agar solution and the temperature at which it is cooled. The higher the concentration of agar and the lower the cooling temperature, the stronger the gel will be.
Overall, the advantage of the high gel strength of agar makes it an increasingly versatile and widely used product in the food industry and scientific research.
Maybe you are curious about how agar gel strength is measured, so today we will introduce in detail the equipment and methods needed to test the agar gel strength.
Electronic balance (accuracy 0.001g) | Electronic balance (accuracy: 0.1g) | Multi-head magnetic stirrer |
Pharmacist balance | A set of matching weights (1000g*1, 500g*1, 200g*2, 100g*1, 50g*1, 20g*2, 10g *1, 5g*1) | Constant temperature and humidity incubator |
Magnetic stirrer | Flat cover (dish: 90 mm in diameter) | Beaker: 300 mL |
The recipe is for reference only, the ingredients and their additions can be adjusted appropriately according to the actual situation.
It is not enough to have a vegan gummy recipe, because the production of gummies is not an easy task, and improper handling can easily cause various quality problems.
Next, we will tell you in detail how you should proceed with the manufacturing of vegan gummies according to the above recipe.
Weigh 1.50g (accurate to 0.001) agar powder in a weighted 300mL beaker, add 106.5g ± 0.5g distilled water, and place on a magnetic stirrer to heat and stir. Keep the solution boiling twice. Each time you boil, rinse the agar powder on the wall with a spoon filled with the test solution to ensure that the agar powder is fully dissolved.
After boiling twice, weigh to ensure that the weight of the test solution reaches 101g ± 0.8g.
Pour the solution into the upper cover of the 90mm diameter culture dish, and let it stand at room temperature (the gel weight is about 92g±1g), buckle it on the slide and put it into the 20°C constant temperature and humidity box for 4h-8h and then measure.
(1) Place the weight of the estimated strength equivalent weight on the right plate of the balance, press the left plate by hand, then put the sample on the left plate, and make the probe (cross-sectional area 1.0g/cm2) contact the surface of the gel. If the gel is not deformed in a short time, start timing with a stopwatch
(2) According to the reading of the stopwatch, by increasing or decreasing the weight (small to large), read the weight of the weight when the gel surface is broken at 13.5±1 seconds; measure at least 2 breaking points, and calculate the average value “M”
(3) Weigh the culture dish and the weight of the gel “m”
Calculation of results Gel strength (g/cm2) = (M-m)/1
In the formula:
M: measurement weight required for 13.5±1s, g; m: culture dish and gel weight, g;
1: probe surface area, cm2.
There are many agar factories around the world, and the testing methods for agar gel strength vary, as do the testing environments.
Therefore, even if the same sample is tested by different laboratories, the results will not be exactly the same.
Here is a simplified version of the agar gel strength test method
1. Weigh 3g of agar, put it in a 400ml beaker, and add 230 ml of distilled water.
2. Heat it in the electric stove, stirring to dissolve it completely, so that the final content is 1.5%.
3. Pour the dissolved glue solution into the quantitative container, let the glue solution cool down and put it into the thermostat, and leave it at a constant temperature of 20℃ for 4-8 hours.
4. Use the gelometer to measure its strength. The sum of the weight added to the pressure lever is the gel strength of agar.
If you would like more information about agar, such as agar production, testing methods, and industry standards, click the below button to contact our team.
Contact opnemen met ons team
4 topgidsen over hoe Agar Agar te gebruiken
E406 Agar vs Agarose | Difference between Agar and Agarose
How to Make Agar Agar Powder-The 3 Common Extraction Methods
Wij zijn een biotechbedrijf dat gespecialiseerd is in het onderzoek naar, de ontwikkeling en commercialisering van innovatieve en technologische voedingsadditieven hydrocolloïden. Agar Agar, Carrageen, en Stabilisatoroplossingen op maat.
Met de uitgebreide knowhow en ervaring in het onderzoek, de toepassing en het gebruik van hydrocolloïden, kunnen we een one-stop-shop bieden aangepaste oplossingen perfect afgestemd op de behoeften van onze klanten.
Onze producten voldoen aan de behoeften van de vlees-, zuivel-, bakkerij-, banketbakkerij- en andere industriële sectoren.
Neem contact op met onze vertegenwoordiger voor meer informatie.
Gino Biotech is al meer dan 10 jaar een belangrijke leverancier van hydrocolloïden voor voedingsmiddelen. Met onze verscheidenheid aan plantaardige gommen en stabilisatoren kunnen we op maat gemaakte hydrocolloïdoplossingen creëren die perfect zijn afgestemd op de behoeften van onze klanten. [LEES VERDER
Deze documenten zijn gemaakt door experts die zich al meer dan 8 jaar bezighouden met de hydrocolloïdenindustrie.
Deze documenten bevatten de geheimen van de industrie.
Laat je e-mail achter om ze te ontvangen, het is 100% gratis!
* 39.4 Mb, De downloadlink wordt naar je e-mail gestuurd.
* Je e-mailgegevens zijn absoluut veilig, we geven ze niet door aan derden voor welke reden dan ook.
Abonneer je op Het geheim van Verbinden met een beter en gezonder leven!
Dutch 
English 
Spanish 
Portuguese 
French 
Arabic 
Russian 
German 
Korean 
Japanese 
Italian 
Turkish 
Polish 
Ukrainian 
Indonesian